Porcelain Sealer - One Coat - Stain & Scratch Resistant
Easy application, 100% breathable. Advanced, Nano-coating sealer. Safe, low-odour formula. Coverage: 10 - 20 m²/litre
Smartseal Porcelain Sealer is a hard wearing, breathable, protective coating for modern internal & external porcelain tiles. The porcelain tile sealer can also be used on ceramic wall and floor tiles. Furthermore, it helps to prevent general soiling & surface staining. Although this is not a cosmetic product, it does act as a colour enhancer and leaves a subtle wet look sheen once dry. However, its main purpose is to make cleaning and maintenance easier.
Smartseal Porcelain Sealer is a ready to use, easy to apply, quick-drying formulation that gives additional protection oil and water-based stains whilst enhancing the natural colours of the tiles. Once applied the porcelain tiles sealer will make cleaning and maintenance of porcelain surfaces much easier. WE DO NOT RECOMMENDED USING ON HIGHLY POLISHED SURFACES.
FEATURES
- Suitable for use on porcelain and ceramic tiles
- Strictly a single-coat application
- Leaves a subtle wet look sheen once dry
- Enhances the colours of the tiling
- Can be used externally on patios
- Also for use on walls and floors internally
- Ultra-durable sealer for long term protection
Formula is ready to use, quick drying and easy to apply.
Average coverage: 10 - 20m² per litre, dependant on surface texture and porosity.
Application temperature range: 10° to 23°C
Directions for Use:
Always apply to a test area or spare tile first.
Only apply to completely dry and clean surfaces.
**If applied to a surface where a "sweep-in" pointing compound has been used within the last 6 months, the porcelain must be fully cleaned with Smartseal Residue Remover prior to sealant application.**
Apply a single thin, consistent coat, with a microfibre cloth, microfibre flat mop or paint pad. Avoid application marks and excess pooling of sealer.
Please note:
This formulation is strictly a single coat application, because it is a high active micro coating that bonds very strongly to the impervious porcelain.
It is not a cosmetic product. Although it does make the treated surfaces look more attractive, its main purpose is to aid easier cleaning and maintenance.
Applying more than one coat to achieve the "desired appearance" will almost definitely result in application issues and product failure.
Given the above, it is important the exact application instructions are followed.
- Allow a minimum of 2 hours drying time before walking on. The sealer will be fully-cured and attain full water-resistance after 24 hours.
- If using externally, do not apply if rain is forecast within 8 hours.
- Average coverage 10-20m² per litre. Coverage will vary depending on surface texture and porosity.
- Store in cool, dry conditions out of direct sunlight in original container only. USE WITHIN 6 MONTHS OF PURCHASE & WITHIN 3 MONTHS ONCE OPENED.
Q: We are using cream porcelain tiles for a hearth and vertical backplate for our log burner and wanted to seal the tiles before installing the stove. Will the heat from the stove adversely affect the porcelain sealer?
A: Once fully cured the heat from the wood burner should not adversely effect the porcelain sealer.
Q: The Porcelain tiles are slippery. Will the sealer fix this issue or do I need to carry out another process before sealing the tiles?
A: Porcelain by its very nature is very smooth and can be slippery, sealer will not solve this issue. The benefit of applying Porcelain Sealer would be general protection, enhancing the appearance and inhibiting algae growth. Hope that helps.
Q: I applied porcelain sealer to my patio a year ago. Does it need to be applied again periodically to maintain the performance? Thanks
A: The porcelain sealer should be re-applied periodically for optimum performance. On average, with usage and weather conditions a factor, this would be every 3 years. Hope that helps.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.
Excellent product. Easy to apply and fast working. Ideal for porcelain.
Good sealer for porcelain