ROOF SEALER 'Breathable' Dry Finish - Protects Concrete Tiles & Slates 10 yr+
(Sample 100ml, 5, 25L & Bundles) Highly Protective, Impregnating & Breathable Protects from MOSS, ALGAE & WATER 10yr+. Clear Protective Impregnating Roof Sealer for Concrete, Slate and Clay Roof Tiles. Safe & Easy to Apply
Clear Roof Sealer
Smartseal roof sealer creates a water repellent barrier and protects against re-growth of moss and algae.
The roof tile sealer is a high quality, clear, solvent free acrylic impregnating roof sealer for concrete, clay or slate tile roofs. Once applied, the roof sealer will alter the chemical structure of any roof tile and provide an excellent water repellent surface. The clear roof sealer will also greatly restrict the growth of algae, lichen and moss to the surface of the tile.
Roof Tile Sealer features:
- Suitable for slate, clay tiles and concrete tiles
- 1 x 25 litre will treat up to 125 m2 on concrete roof tiles & 200-250 m2 on clay & slate roof tiles
- Highly resistant to water, staining and organic growth
- Will not change appearance of roof tile
- One-coat to saturation (with 2nd lighter coat)
- Average coverage 5 m² per litre
- Application by sprayer or brush
- Touch dry 2-3 hours
- Fully waterproof 24 hours
- Lifespan up to 10 years
- Solvent free impregnating sealer
PREPARATION:
- Before application of roof sealer make sure tiles or slates are totally clean, dry and free from moss or algae spores.
- Unless applied to a new roof, pressure washing and application of suitable biocide is essential.
APPLICATION: Apply roof sealer by hand held sprayer or brush, apply to saturation, it is recommended that after around 20 - 30 minutes a light second 'wet on wet' coat is applied. Not to be applied if there's a threat of rain or temperatures below 12°C. Apply to test area first, mix container before use.
Clean equipment with water immediately after use.
SHELF LIFE: Use as soon as possible after opening. Store away from sun and sources of heat. Avoid frost and low temperatures.
Can be stored for 12 months (in original sealed container).
Q: You give the coverage, is that per coat or for both ?
A: Coverage rates would vary due to age, type and porosity of roof tile. Average coverage would be 4m2 first coat and 6m2 second coat (higher on slate and clay tiles) Hope that helps.
Q: Can you please advise the coverage/litre? Thanks.
A: Average coverage of the roof sealer is 4 m2 per litre. This would vary in relation to the age, type and porosity of the roof tile it is being applied to. Hope that helps.
Q: Does this leave a shiny surface, or is it matt like the original tiles? Thanks.
A: This roof sealer will not change the appearance of the tile. Samples are available for testing. Hope that helps.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.
We continue with this major restoration of a 2000+ roman tile roof and the sealer has come up as good as the cleaner. Water runs off in beads rather than soaking the old tiles. The roof is pink instead of grey. This is a DIY job being undertaken by a couple of 75 year old, very able retirees. The kit will cost about 800 as opposed to quotes in excess of 20,000 and has put new life into a 1966 roof.
Carefully cleaned clay double Roman tiles and sprayed on sealant. Two coats as recommended. Really too early to say if its effective. Had some rain but havent noticed any change to tiles. What is clear is its very expensive. Spraying my whole bungalow will probably cost best part of 800. However, if it prolongs the life of the tiles all good - although I suspect Ill need to recoat every year or so! Time will tell.
Excellent good quality roof sealer and excellent good fast delivery service will use again